Buying the Right Replacement Hot Tub Spa Pumps

With regular use, the hot tub spa pumps can work around five to ten years. If you’ve had your spa pump longer than five years and start to experience maintenance related problems frequently or major breakdowns, it’s highly recommended to consider replacement for your hot tub spa pumps.

Before going into detail, you should know the common symptoms of spa pumps. Some of them are discussed below:

Leak 

Loose frames can cause water to escape while propelling through the spa pump. You should check the frames and o-rings regularly to make sure that they are perfectly tight and safe. Leak can be caused due to a faulty pump seal. Therefore, you should change the pump seal while replacing your pump to make sure a leak-free, tight fit.

Water pressure 

If the water pressure is low, there may be obstructions that prevent the impeller from turning on. Check regularly and remove any debris to prevent jamming further.

Noise 

If the bearings are worn, they can produce a humming sound and prevent the motor from operating perfectly. Check the bearings for corrosion or dirt and replace right away if they are worn.

Heating 

Under regular conditions, you can keep your hand on a spa pump without getting burned. When the heat production increases and also the temperature, it can release unnecessary energy. Overheating can happen, when there is not enough clean air flowing through the motor. If this is the case, there may be an issue with the motor.

Inactive motor 

If the motor isn’t working, check whether the power switch is on. If it is on and is still inactive, check for burnt out wires or a blown fuse. You should check all the connections including the copper bonding wire and the pump power cable for any damage signs.

If your spa pump has failed, you need to consider a few factors in order to buy a right replacement for your requirements:

Spa pump voltage – First, understand whether the existing spa pump you have a 110-120VAC or 220-240VAC pump.

Amps – You shouldn’t get confused by the terms like HPR that overstates the true horsepower. If you’ve doubts, you should make the match to the Amps ratings present on the motor label. To double the flow, you require increasing the horse power by eight times. So, a small change in horsepower either up or down will have a little impact on flow.

Speed – Does your spa pump operate at 2 speed or a single speed? Usually, spa pumps that are available on the market are mostly 2 speed; but can be used as one speed by using the high speed terminal.

Connection arrangement – All of the hot tub spa pumps are center suction and side discharge pumps. Most of them are designed to utilize 2” unions; but a few have 1-1/2” unions like the circulation pumps.

Final consideration –

Please check out hot tub spa pumps available at Cedar Tubs Direct and make a right choice to make the most out of your hot tubing experience in the comfort of your home. For more details about our products, pricing details, and features, please visit our website.

Top Things To Know About Mineral Spa & Hot Tub Ionizer

Are you looking for hot tub accessories to eliminate chemical consumption in your swimming pool or spa? If yes, then mineral ionization is needed to get rid of chemicals from hot tubs or swimming pools. However, mineral ionization can be the most easiest, affordable alternative to ensure sanitization of chemicals from hot tubs or pools.

 

What Is Mineral Ionization: –

Ionization is a process that occurs when atoms gain or loose electrons naturally. Generally, natural minerals when charged electrically act as ionizers. Unlike other devices, Argenia A-400 mineral ionizer can use three type of metals like silver, copper and zinc providing bets results.

Silver (Ag): –

• Silver ion has ability to kill over 650 varieties of protozoa like HIV, Legionella Penumophila (Legionnaire’s disease) streptococcus, E-coli, salmonella, virus and bacteria.
• It can be used in ailments like acne, athlete’s foot, rashes, septic ulcers, skin cancer, sunspots, yeast infections, lesions, poison oak and more.
• Silver is also a better alternative to treating minor bites, wounds, scrapes and burns.

Application Of Silver Ion: –

• In ancient Greek civilization, the royal people used to drink from silver goblets and the water stored in silver turned purified drinking water due to the presence of silver.
• Now NASA (National Aeronautics and Space Administration) makes the best use of silver metal to purify water for astronauts.

Copper (Cu): –

Copper (Cu) ion helps in prevention of algae growth. After all, Copper is well-recognized as one of the most preferable algicide killers on the planet.

Zinc (Zn): –

Zinc ion stimulates in skin healing and prevents against stains on the hot tub. No matter what, it offers silky soft skin and helps in healing any kind of skin irritations.

Top Benefits of Mineral Ionization: –

• Mineral ionization is fully safe process as there’s no toxic chemicals produced or consumed.
• The ionizer is environmentally friendly and does not give any chemical residue.
• The water will be hygienic, odor-free and sanitary.
• Improvement of water quality through ionization.
• Water of the hot tub or spa feels fresh and clean without any chemical smell.
• This process and the ionizer are ideal alternative to those people who are allergic or sensitive to sanitizing chemicals.
• Non-corrosive system components.
• Easy installation and operation

Where You Buy Mineral Ionizer: –

Cedar Tubs Direct specializes in offering quality hot tub accessories for great bathing experience from hot tub sauna or pool. If you are looking to buy mineral ionizing device for your needs, buy Argenia A-400 Mineral Ionizer, the best hot tub accessories from Cedar Tubs Direct at affordable costs. It has a mineral cartridge; which contains Zinc, Copper and Silver electrodes. For more information about our products, Click Here.